If you’re a Christmas light contractor trying to figure out how to get more leads, this one’s for you. Our team has hung Christmas lights for nine years, starting with one ladder and a few cases of bulbs. ChristmasPlug is a free directory of Christmas light installers across the United States. Below is exactly how installers get Christmas light leads without paying for them, and the gear the crews we work with use every season.

Is there a free lead site for Christmas light installers in the USA?
Short answer: Yes. ChristmasPlug is a free directory of Christmas light installers across the United States. Listing is free, and installers rated 4 stars or higher can claim FREE LEADS at no cost, with only 3 installers per job.
Christmas light contractors don’t need another subscription. Most lead sites charge you to get on the list, then charge again to see a lead, and the same lead goes to five other companies. We built ChristmasPlug the other way around:
- Your profile is free. Photos, reviews, service area, what you install and whether you do permanent lighting.
- You show up in your area. Every city near you gets its own page, and installers inside that range are listed first.
- FREE LEADS. When a homeowner asks for quotes somewhere with no local installer, the job goes on our FREE LEADS board. Installers rated 4 stars or higher can claim it for $0, and only 3 installers can claim each job. You get an email marked URGENT LEAD the minute one posts near you, with a photo of the homeowner’s house.
- Badges that mean something. Send us your certificate of insurance and you get the red COI Verified badge.
- A forum with real answers. Pricing, materials, how to install like a pro and how to run the business, all in the ChristmasPlug forum.
Christmas light contractors in every state can join. It takes about two minutes and only the first four steps are required. List your business free.
How do I get more Christmas light leads? (8 ways that work)
Short answer: List your business free on ChristmasPlug, claim FREE LEADS, get to 4+ stars on Google, put a yard sign at every install, use bandit signs where allowed, pay $50 referrals, quote the same day and answer homeowner questions online.
- List your business free on ChristmasPlug. Homeowners search by city, and every city near you gets a page that lists the closest installers first. Create your free listing.
- Claim FREE LEADS. Jobs in areas with no local installer go on the FREE LEADS board. No fees, ever, and only 3 installers per job.
- Get to 4 stars or higher on Google. Reviews win jobs, and on ChristmasPlug they unlock free leads. Ask every happy customer for a review the day you finish.
- Put a branded yard sign in every customer’s yard. Neighbors call, and your routes get tighter every year.
- Use bandit signs where they’re allowed. 100 to 300 small signs at busy intersections and in neighborhoods you want to work in. Check your city’s sign rules first. If they aren’t allowed, respect that.
- Pay $50 referrals. When a customer sends a neighbor and the neighbor mentions them, the customer gets $50. Customers love it.
- Quote fast. The first installer with a price usually wins. We measure and quote from a photo with Grants Pro Estimator, the free photo estimator and the job price calculator.
- Answer homeowner questions. Installers who answer in the ChristmasPlug forum show up as the expert before the homeowner ever calls.

What Christmas light bulbs do the pros use?
Short answer: Commercial-grade C9 LED bulbs with a thick polycarbonate shell and one-piece construction. We use Elite C9 faceted bulbs with colored bands so crews never mix up shades of white.
Homeowners can’t see the difference between bulbs on day one. They see it in year two, when cheap bulbs turn yellow, crack or pop apart on the roof. Here is what we look for.

Polycarbonate, not polystyrene
Polycarbonate is the same family of plastic used in bulletproof glass. Polystyrene is what old CD cases were made of. Polystyrene bulbs yellow in the sun, get brittle and can crack or splinter. A good polycarbonate C9 has a thick shell, and you can drop it on the driveway and pick it back up. That is the first thing we check on any bulb.
One-piece construction
Two-piece bulbs, where the shell snaps onto a separate cap, like to bust open. Look for a seamless, one-piece shell that seats straight into the base. Fewer seams means less water getting in and fewer service calls.
Color bands so your crew never mixes whites
We run the Elite C9 LED faceted bulbs and the new 2026 C9 faceted bulbs. Each one has a colored band so you can tell the whites apart at a glance:
- Warm white: yellow band
- Sun warm white: orange band
- Winter warm white: green band
- Cool white: blue band
- Pure white: white band
Mixing two whites on one roofline is the fastest way to get a callback. With the bands, a new guy can sort a bin of loose bulbs in seconds. Some bulbs use small plastic bases to show the color instead. That’s not a bad bulb, it’s just not my favorite. The band does the same job without the extra part.
Shopping by budget? We also carry the GOAT C9 faceted bulbs and Minleon C9 faceted bulbs by the case, and commercial mini lights (17 ft strands, sets of 6) for wrapping trees. See every C9 bulb and mini light we stock.

What wire, plugs and clips do Christmas light installers use?
Short answer: SPT1 socket cord on 1,000 ft spools cut to fit, custom SPT1 extensions, one plugs, clear end caps, Best Clips and wedge clips on rooflines, ridge clips on hips and ridges and magnetic clips on metal.
- Socket cord: SPT1 only, on 1,000 ft spools that we cut to fit every roofline. We stock GOAT, Admiral, Minleon and our standard commercial socket line.
- Extensions: we make our own from 500 ft and 1,000 ft SPT1 extension wire or GOAT bare wire, so every jumper is the length we need.
- Plugs: one plugs, or what we call universal one connectors, with the male and female in one piece. We also carry male, female and all-in-one SPT1 connectors.
- End caps: clear termination caps seal the end of every run. They are quick, and any crew member knows what they’re for.
- Roofline clips: the Minleon circle clip, the Best Clip and the wedge clip. We’re not big fans of the Tough Clip. Need a few? Grab bags of C9 clips.
- Ridges and hips: the Best ridge clip and regular ridge clips. If we’re only doing the front of a house, regular circle clips that slide under the shingle work fine.
- Yard stakes: the Minleon 7 inch yard stakes. We have a great deal on them at GrantsOutdoor.com.


SPT1 socket cord on the spool, and extension wire on a reel for custom extensions.


A C9 clip and a clear end cap.
Magnetic clips vs. Lightnetics
For metal surfaces we use magnetic clips (100 pack or 1,000 pack) instead of Lightnetics. The tabs on magnetic clips can break, but they’re a lot cheaper and you don’t waste socket line. With Lightnetics, if a run ends up three or four feet long, you pay for that extra length. Our trick: hot glue each magnet clip onto the cord. If a tab breaks it stays put. You won’t get it off again, so it works just like Lightnetics for a fraction of the cost, since you only buy the clips and the socket cord separately.
What tools does a Christmas light installer need?
Short answer: Crescent cutters, clear bins and bags, a rolling toolbox, a rubber mallet, a portable power station for testing and a simple spool setup so wire pays out without tangling.
- Crescent cutters. These snips can cut through a penny. We use them on clips, wire and anything else that needs a clean cut.
- Clear bins and clear trash bags. You can see what’s inside without tearing it open.
- Rolling toolboxes. Hart, Milwaukee and Husky all make good ones.
- A rubber mallet or hammer for pushing stakes into hard ground.
- A portable power station. A Jackery, or the Ryobi unit that runs off an 18 volt battery, lets you test every strand even when the customer’s outlet isn’t live yet. Check your amps first with the load calculator.
The tamper-tool spool trick
For 500 ft and 1,000 ft reels of socket cord, we slide the reel over a 10 x 10 inch tamper from Home Depot or Lowe’s (about $50). It sits flat, it doesn’t tip and you can pull wire as far as you need without buying a spool holder. For extension wire we go a step further: we drill holes in the bottom and sides of a bucket and feed a 1,000 ft run through it. It pays out without twisting, which is huge on big HOA and commercial jobs. New guys start with a 250 ft reel.

How do Christmas light installers stay safe on steep roofs?
Short answer: A goat hook for steep roofs, a Ridge Pro with a rope to stay tied off, pitch hoppers to stand on and Cougar Paws on every crew member.
- Goat hook for getting up and around steep roofs.
- Ridge Pro with a rope to stay tied off.
- Pitch hoppers to give you a flat spot to stand without sliding.
- Cougar Paws on every guy’s feet.

How do you finish a Christmas light install so the customer never calls back?
Short answer: Do a final walk-around to catch bulbs that untwisted, then secure every jumper: hot glue it into sidewalk saw joints and stake it low in the grass.
Final walk-around, every time. Bulbs can untwist during the install. If you don’t walk the house before you leave, the customer finds it for you.
Secure every jumper. When a short extension crosses a sidewalk, we hot glue it into the saw joint in the concrete. In the grass we stake it with 4 or 6 inch stakes, or with cheap plastic stakes that are actually made for C9 garden lights. They hold the wire low, don’t damage it and pull out clean, so the lawn guy never hits a pile of metal stakes.

How should Christmas light installers schedule installs and takedowns?
Short answer: You set the install date, not the customer. Schedule all takedowns after installs are done so routes stay tight.
- You set the install date. We give customers their install date. We don’t let them pick.
- Removals come after installs. We take a preferred time frame, then schedule every takedown once installs are done so the routes stay tight and nobody falls behind.
A few of our installs


A wrapped oak tree and a lit tree-lined walkway.


A roofline install at night and a permanent lighting install in DFW.
The installer shopping list
- Bulbs: Elite C9, new 2026 C9, GOAT C9, Minleon C9, mini lights
- Socket cord: GOAT 1,000 ft, Admiral 1,000 ft, Minleon 1,000 ft
- Extension wire: 500 / 1,000 ft reels, GOAT bare wire
- Connectors: one plugs (bag of 100), male, female and all-in-one, clear end caps
- Clips: Best Clips, wedge clips, Minleon clips V2, magnetic clips
- Estimating: Grants Pro Estimator, Christmas light price tool
Christmas light leads: common questions
How do Christmas light contractors get leads?
The ones that work best for us: a free listing on ChristmasPlug, FREE LEADS for areas with no local installer, Google reviews, yard signs in every customer’s yard, bandit signs where they’re allowed and $50 referrals.
Are the leads on ChristmasPlug really free?
Yes. Listing is free and FREE LEADS cost $0. Installers rated 4 stars or higher can claim them, up to 3 per job.
How do I get Christmas light leads fast this season?
List your business today, add your Google review link so you qualify for FREE LEADS, put signs out at every install and quote from a photo the same day someone asks.
Where do pros buy commercial-grade Christmas lights?
Our team buys ours at GrantsOutdoor.com: polycarbonate C9 bulbs, SPT1 socket cord, extension wire, plugs, clips and end caps.
Get the gear and get listed
Everything above is available at GrantsOutdoor.com: commercial-grade C9 bulbs, SPT1 socket cord, extension wire, plugs, clips, end caps and stakes, for installers across the country.
Then put your business where homeowners are looking. List your business free on ChristmasPlug and start getting FREE LEADS near you.
Disclosure: ChristmasPlug is affiliated with GrantsOutdoor.com, which sells some of the products linked in this article.
