Christmas Light Plugs and Extension Wire

Plugs and wire to make Christmas light extensions any length. Shop plugs:

GOAT dark green male plug, side view

GOAT male plugs

$74.99 / 100
$0.75 per plug · Free shipping

Shop GOAT

GOAT dark green female plug for SPT-1 wire

GOAT female plugs

$74.99 / 100
$0.75 per plug · Free shipping

Shop GOAT

Green Gilbert male plug for SPT-1 Christmas light wire

Gilbert male plugs

Green $119.99 / 100
$1.20 per plug · Free shipping

Shop Gilbert

Green Gilbert female plug with knockout tab for SPT-1 Christmas light wire

Gilbert female plugs

Green $109.99 / 100
$1.10 per plug · Free shipping

Shop Gilbert

In this guide:

  1. How vampire plugs work
  2. Gilbert vs GOAT
  3. Male plugs
  4. Female plugs
  5. One Plugs and all-in-one connectors
  6. SPT-1 extension wire
  7. Make a custom extension
  8. Seal the ends
  9. How many per job

1. How vampire plugs work

Open GOAT plug showing the metal vampire teeth that pierce SPT-1 insulation
Inside the plug: metal teeth that bite through the wire insulation.

Christmas light plugs are called vampire plugs because of the sharp metal teeth inside. When you close the plug on SPT-1 wire, the teeth poke through the rubber insulation and touch the copper. No stripping, no tape, no tools. That’s what lets you make an extension or a light run any length you want.

2. Gilbert vs GOAT plugs

Green Gilbert male plug for SPT-1 Christmas light wire
Gilbert: softer plastic, lighter green.
GOAT dark green male plug, side view
GOAT: harder plastic, darker green.
  1. Gilbert plugs are a softer plastic in a lighter green. They also come in white, brown and black to match your wire.
  2. GOAT plugs are a harder plastic in a darker green, at a lower price per plug.
  3. Both are made for SPT-1 18/2 wire and work the same way.
  4. Match the plug color to the wire so the connection disappears on the house.
Green Gilbert male plug for SPT-1 Christmas light wire

Green

White Gilbert male plug for SPT-1 wire

White

Brown Gilbert male plug for SPT-1 wire

Brown

Black Gilbert male plug for SPT-1 wire

Black

Gilbert colors: white, brown or black, $129.99 per 100 male ($1.30 per plug) or $119.99 per 100 female ($1.20 per plug) · Free shipping

3. Male plugs

Green Gilbert male plug for SPT-1 Christmas light wire
Gilbert male plug.
GOAT dark green male plug, back view with blades
GOAT male plug, back view.

What it does: turns a cut end of wire into a plug that goes into the outlet, timer or a female plug.

How to install it:

  1. Cut the wire clean and square. No stray copper sticking out.
  2. Open the plug and lay the wire in, pushed all the way to the end.
  3. Line up the ribbed side of the wire with the wide blade side of the plug.
  4. Squeeze the plug closed until it snaps. The teeth bite through the insulation.
  5. Plug it in and test before you hang it.

GOAT: $74.99 / 100, $0.75 per plug. Gilbert green: $119.99 / 100, $1.20 per plug. Gilbert case: $699.99 / 1,000, $0.70 per plug · Free shipping

GOAT dark green male plug, side view

GOAT male

100 count

Shop

Green Gilbert male plug for SPT-1 Christmas light wire

Gilbert male

100 or 1,000

Shop

4. Female plugs

Green Gilbert female plug with knockout tab for SPT-1 Christmas light wire
Gilbert female plug with knockout tab.
GOAT dark green female plug for SPT-1 wire
GOAT female plug.

What it does: lets another plug connect into the wire, so you can link runs and leads together.

How to install it:

  1. Install it the same way as the male plug: clean cut, ribbed side lined up, squeeze shut.
  2. Put one on the end of every lead so a light run can plug into it.
  3. Gilbert knockout tab: pop out the tab when you want the wire to pass through, so the plug can sit in the middle of a run.

GOAT: $74.99 / 100, $0.75 per plug. Gilbert green: $109.99 / 100, $1.10 per plug. Gilbert inline case: $699.99 / 1,000, $0.70 per plug · Free shipping

GOAT dark green female plug for SPT-1 wire

GOAT female

100 count

Shop

Green Gilbert female plug with knockout tab for SPT-1 Christmas light wire

Gilbert female

100 or 1,000

Shop

5. One Plugs and all-in-one connectors

Gilbert One Plug joining two sections of green SPT-1 wire inline
Gilbert One Plug joining two wires.
GOAT all-in-one connector installed on SPT-1 wire
GOAT all-in-one connector on wire.

What they do: join two pieces of SPT-1 wire directly, without a separate male and female plug. Fewer parts, cleaner runs.

How to use them:

  1. Cut both wire ends clean.
  2. Lay one wire in each side, ribbed sides lined up the same way.
  3. Close the connector until it snaps, then test.
  4. Use them for jumpers between roof sections and long custom power runs.

Gilbert One Plug: $129.99 / 100, $1.30 each, or $899.99 / 1,000, $0.90 each. GOAT all-in-one: $125 / 100, $1.25 each · Free shipping

Gilbert One Plug joining two sections of green SPT-1 wire inline

Gilbert One Plug

100 or 1,000

Shop

GOAT all-in-one connector installed on SPT-1 wire

GOAT all-in-one

100 count

Shop

6. SPT-1 extension wire

Green SPT-1 18/2 extension wire spool

Extension wire

500 ft $169.99 ($0.34/ft)
1,000 ft $249.99 ($0.25/ft)
Free shipping

Shop

GOAT bare SPT-1 extension wire on spools

GOAT bare wire

500 ft $169.99 ($0.34/ft)
1,000 ft $209.99 ($0.21/ft)
Free shipping

Shop

250 ft spool of green SPT-1 zip cord used to make custom Christmas light extension leads

250 ft 2-pack

Green, white, brown or black
$169.99 for 500 ft ($0.34/ft)
Free shipping

Shop

250 ft spool of green SPT-1 zip cord used to make custom Christmas light extension leads

Green

White SPT-1 zip cord, 250 ft spool

White

Brown SPT-1 zip cord, 250 ft spool

Brown

Black SPT-1 zip cord, 250 ft spool

Black

SPT-1 18/2 wire, also called zip cord or lamp cord, is plain two-wire cord with no sockets. Pick the color that matches the house trim or roof so the wire disappears.

7. Make a custom extension any length

Spool of SPT-1 extension wire with the end pulled out
Pull off exactly what you need. No extra cord coiled in the bushes.
  1. Measure from the start of the light run to the outlet or timer.
  2. Cut the wire to that length, clean and square.
  3. Snap a male plug on one end and a female plug on the other.
  4. Test it before it goes up.
  5. Run it along the downspout or trim. Keep plugs and connections out of gutters and anywhere water collects.
  6. If a connection sits within about a foot of the ground, add dielectric grease.

8. Seal the ends

Clear end cap sealing the end of green SPT-1 wire

Clear end caps

Push onto the cut end of the last run.
$55 / 100, $0.55 each · Free shipping

Shop end caps

Sealed ends mean fewer tripped outlets in the rain. More in how to seal Christmas lights.

9. How many plugs per job

Two-story home outlined in warm white C9 lights with lit bushes and driveway
A typical home uses about 7 male and 10 female plugs.
500 ft C9 Christmas light kit with 12-inch spacing: socket wire, 500 warm white bulbs, 500 clips and 250 ft zip cord

500 ft kit

50 male + 50 female plugs and 250 ft of wire included.
From $1,099 · Free shipping

Shop kit

1,000 ft C9 Christmas light kit with 15-inch spacing: socket wire, 800 warm white bulbs, 800 clips and 250 ft zip cord

1,000 ft kit

50 male + 50 female plugs and 250 ft of wire included.
From $1,799 · Free shipping

Shop kit

Keep reading: C9 socket wire guide · clips guide · lights per outlet

Quick answers

What are vampire plugs for Christmas lights?

Vampire plugs are slide-on plugs with sharp metal teeth inside. When you close the plug on SPT-1 wire, the teeth pierce the insulation and touch the copper, so you can add a plug anywhere without stripping wire.

What is the difference between Gilbert and GOAT plugs?

Gilbert plugs are a softer plastic in a lighter green and come in green, white, brown and black. GOAT plugs are a harder plastic in a darker green and cost less per plug. Both fit SPT-1 18/2 wire.

How do I make a custom Christmas light extension cord?

Cut SPT-1 wire to the length you need, snap a male plug on one end and a female plug on the other with the ribbed side of the wire lined up with the wide blade, then test it before installing.

Which side of the wire goes to the wide blade?

Line up the ribbed side of the SPT-1 wire with the wide blade side of the plug.

What is a One Plug?

A Gilbert One Plug joins two pieces of SPT-1 wire directly, without a separate male and female plug.

How many plugs does a Christmas light job need?

A typical home uses about 7 male and 10 female plugs. Christmas light kits include 50 of each.

ChristmasPlug Team
Author: ChristmasPlug Team

The ChristmasPlug team: Christmas light installers with nine years in the trade.

Written by the ChristmasPlug team
Our team has installed Christmas lights for nine years, from single-story rooflines to large HOA and commercial displays. About ChristmasPlug

Refunds & cancellation · GOAT Verified