Plugs and wire to make Christmas light extensions any length. Shop plugs:
In this guide:
- How vampire plugs work
- Gilbert vs GOAT
- Male plugs
- Female plugs
- One Plugs and all-in-one connectors
- SPT-1 extension wire
- Make a custom extension
- Seal the ends
- How many per job
1. How vampire plugs work

Christmas light plugs are called vampire plugs because of the sharp metal teeth inside. When you close the plug on SPT-1 wire, the teeth poke through the rubber insulation and touch the copper. No stripping, no tape, no tools. That’s what lets you make an extension or a light run any length you want.
2. Gilbert vs GOAT plugs


- Gilbert plugs are a softer plastic in a lighter green. They also come in white, brown and black to match your wire.
- GOAT plugs are a harder plastic in a darker green, at a lower price per plug.
- Both are made for SPT-1 18/2 wire and work the same way.
- Match the plug color to the wire so the connection disappears on the house.
Green
White
Brown
Black
Gilbert colors: white, brown or black, $129.99 per 100 male ($1.30 per plug) or $119.99 per 100 female ($1.20 per plug) · Free shipping
3. Male plugs


What it does: turns a cut end of wire into a plug that goes into the outlet, timer or a female plug.
How to install it:
- Cut the wire clean and square. No stray copper sticking out.
- Open the plug and lay the wire in, pushed all the way to the end.
- Line up the ribbed side of the wire with the wide blade side of the plug.
- Squeeze the plug closed until it snaps. The teeth bite through the insulation.
- Plug it in and test before you hang it.
GOAT: $74.99 / 100, $0.75 per plug. Gilbert green: $119.99 / 100, $1.20 per plug. Gilbert case: $699.99 / 1,000, $0.70 per plug · Free shipping
4. Female plugs


What it does: lets another plug connect into the wire, so you can link runs and leads together.
How to install it:
- Install it the same way as the male plug: clean cut, ribbed side lined up, squeeze shut.
- Put one on the end of every lead so a light run can plug into it.
- Gilbert knockout tab: pop out the tab when you want the wire to pass through, so the plug can sit in the middle of a run.
GOAT: $74.99 / 100, $0.75 per plug. Gilbert green: $109.99 / 100, $1.10 per plug. Gilbert inline case: $699.99 / 1,000, $0.70 per plug · Free shipping
5. One Plugs and all-in-one connectors


What they do: join two pieces of SPT-1 wire directly, without a separate male and female plug. Fewer parts, cleaner runs.
How to use them:
- Cut both wire ends clean.
- Lay one wire in each side, ribbed sides lined up the same way.
- Close the connector until it snaps, then test.
- Use them for jumpers between roof sections and long custom power runs.
Gilbert One Plug: $129.99 / 100, $1.30 each, or $899.99 / 1,000, $0.90 each. GOAT all-in-one: $125 / 100, $1.25 each · Free shipping
6. SPT-1 extension wire
Green
White
Brown
Black
SPT-1 18/2 wire, also called zip cord or lamp cord, is plain two-wire cord with no sockets. Pick the color that matches the house trim or roof so the wire disappears.
7. Make a custom extension any length

- Measure from the start of the light run to the outlet or timer.
- Cut the wire to that length, clean and square.
- Snap a male plug on one end and a female plug on the other.
- Test it before it goes up.
- Run it along the downspout or trim. Keep plugs and connections out of gutters and anywhere water collects.
- If a connection sits within about a foot of the ground, add dielectric grease.
8. Seal the ends
Clear end caps
Push onto the cut end of the last run.
$55 / 100, $0.55 each · Free shipping
Sealed ends mean fewer tripped outlets in the rain. More in how to seal Christmas lights.
9. How many plugs per job

500 ft kit
50 male + 50 female plugs and 250 ft of wire included.
From $1,099 · Free shipping
1,000 ft kit
50 male + 50 female plugs and 250 ft of wire included.
From $1,799 · Free shipping
Keep reading: C9 socket wire guide · clips guide · lights per outlet
Quick answers
What are vampire plugs for Christmas lights?
Vampire plugs are slide-on plugs with sharp metal teeth inside. When you close the plug on SPT-1 wire, the teeth pierce the insulation and touch the copper, so you can add a plug anywhere without stripping wire.
What is the difference between Gilbert and GOAT plugs?
Gilbert plugs are a softer plastic in a lighter green and come in green, white, brown and black. GOAT plugs are a harder plastic in a darker green and cost less per plug. Both fit SPT-1 18/2 wire.
How do I make a custom Christmas light extension cord?
Cut SPT-1 wire to the length you need, snap a male plug on one end and a female plug on the other with the ribbed side of the wire lined up with the wide blade, then test it before installing.
Which side of the wire goes to the wide blade?
Line up the ribbed side of the SPT-1 wire with the wide blade side of the plug.
What is a One Plug?
A Gilbert One Plug joins two pieces of SPT-1 wire directly, without a separate male and female plug.
How many plugs does a Christmas light job need?
A typical home uses about 7 male and 10 female plugs. Christmas light kits include 50 of each.
